Sew a Wrap Skirt
-
It's a Wrap! (Skirt)
This wrap skirt is so easy to made from two pillowslips. (I've used two different colours to make instructions easy to follow.) It can be tied in front, back or even on the side!
-
-
2. Cut pillowslips open
Cut both pillowslips along one side and across the bottom. Trim away any seam allowances.
-
3. Join pillowslips/insert ribbon
Pin side seams (right sides together), sandwiching ribbon in between.
-
4. Stitch and finish sides
Stitch both sides. Zig-zag stitch or overlock seam allowances together.
-
5. Mark Darts
With erasable pen, on wrong side, mark four 12 cm lines as shown.
-
6. Fold Darts
Fold on line marked in previous step and pin. On top edge, measure 2cm from fold, and draw diagonal line to end of line. This is your stitching line.
-
7. Stitch Darts
Start at wide (top) edge. Backstitch 1 cm, then continue sewing along stitching line, sewing off the edge. Leave long threads at narrow end. Tie these in a double knot before clipping.
-
8. Try it on
Step into tube shape. I've used clothespegs (or safety pins) to find position where snaps will be attached at sides.
-
9. Tie ties and adjust
Ribbons can be tied at front or back. Move pegs/safety pins until skirt fits comfortably - snug, but not too tight or you'll be constantly busting those snaps open!
-
10. Snap Fasteners
Mark spot for snaps with an x in water-erasable pen. You'll need 4 parts (pictured) for each snap, a setter and a hammer.
-
11. How to apply snaps
See instructions given on snap packet. Basically, poke prong spikes thru fabric using skinny end of setter. Balance stud or socket on top, cover with setter and hammer.
-
12. Studs attached
Two studs join the blue panel to the red panel.
-
13. Zigzag hem
(If you want to shorten your skirt to a mini, cut length evenly all round now.) Zig-zag stitch or serge bottom edge of skirt.
-
14. Finish hem
Turn up 2cm on the wrong side. Iron & pin. Stitch 1 cm from edge.
-
Nice Work!
How easy was that! Please send me a photo of your skirt along with any suggestions you have for improving these instructions.